Apply to clean, dry skin right after cleansing
After toning to prep your skin, wait until the surface moisture has fully absorbed. If your skin is still damp, the patch may not adhere properly. Avoid applying in overly hot or humid environments, as perspiration can weaken adherence. For best results, use in a comfortable, moderate setting.
Avoid touching the microcone area with your fingers
When removing the white protective film, be careful not to touch the microcone center of the patch. Position the center of the patch over your target area—such as crow's feet or smile lines—then press down firmly from the center outward toward the edges using vertical pressure. Do not slide or drag the patch into place.
Leave on for at least 2 hours for optimal results
It takes approximately 2 hours for the active ingredients in the microcones to fully absorb into the skin. For best results, leave the patch on for at least 2 hours before removing. You may feel a slight tingling sensation when first applied, but this typically subsides within 5 to 10 minutes.
Use every 2 to 3 days for best results
Rather than daily use, we recommend applying the patch every 2 to 3 days for consistent, effective results. If you experience irritation or flaking upon removal, apply a hydrating serum or lightweight lotion before your next use to ensure your skin is well-moisturized.
Storage and precautions
- Use immediately after opening and store away from direct sunlight
- Do not apply to broken or irritated skin
- Take care to keep the adhesive edge away from direct contact with your eyes